Surveillance Power Enclosure (SGA-AIR2000K)

Surveillance power enclosure

SGA-AIR2000K (sheet: SGA-AIR-2000K) is a Sun Guardian / ENS surveillance power enclosure. Aluminum outdoor box (IP65) for indoor or outdoor use. Mount PTZ, dome, and bullet IP cameras and an IP speaker on the outside; put an NVR, 4G router, and PoE switch inside.

This listing is the power enclosure from the spec sheet — not a 2000 Wh battery kit.

At a Glance

• Indoor / outdoor use; wall or pole mount
• AC input up to 110 V / 1.5 kW
• Two built-in AC output sockets, 110 V / 550 W max each
• Five DC output ports, total 255 W
• Built-in AC input switch
• Open-door alarm switch (normally closed)
• Temperature-controlled cooling fan (activates at 45 °C)
• Red and blue flashing warning light: normally open, normally closed, or alarm-input activated

DC Output Ports (max 255 W total)

• DC 52 V max 2.5 A — PoE switch, PoE NVR (1 port)
• DC 36 V max 2 A — thermal imaging camera (1 port)
• DC 24 V max 1 A — wireless bridge (1 port)
• DC 12 V max 2 A — 4G router, photoelectric transducer (1 port)
• DC 5 V max 2 A — 5 V equipment (1 port)
• Ports can be extended with 1-to-2 or 1-to-4 DC lines

Physical & Power

• Material: aluminum
• Waterproof: IP65
• Surface: powder spraying
• Weight: 9 kg
• Size: H 19.6 × L 14 × W 9 in

Accessories (sheet)

• 3/4 in junction-box adapter × 4 (bullet camera)
• PM 4×10 screw × 3 (speaker)
• PM 6×12 screw × 3 (PTZ)
• Rubber stopper × 4
• PM 4×16 screw × 8 (junction box / dome)
• 6×60 screw (rubber plug) × 4 sets (wall)
• 12 × 700 mm × 1 mm stainless steel holding hoop × 3 (pole)
• Auxiliary installation hook × 1
• CAT6 network cable L = 1.6 ft × 4
• AC power cable L = 6 ft × 1
• DC cable 22 AWG L = 1 ft × 2
• DVR motherboard copper pillars × 8
• DVR hard-drive screws × 4
• Antenna EVA pads × 2

Part number: SGA-AIR2000K

Downloads

Specification Sheet (PDF)